Gopal Trading Co

MS angle or mild steel angle is an L-shaped cross-section used in the construction of various structures and buildings.

A metal channel is a roll formed metal strip that has been shaped into a tube or a U, J, or C shape for industrial and manufacturing use.

 Rolled steel with an H-shaped cross-section. Equal thickness in the two parallel flanges with no taper on the inside surface.

Metal angles, also known more commonly as Angle Iron, are typically L shaped lengths of metal with often equal-sized sides and sold in a variety of lengths.

H-beam is a structural beam made of rolled steel. It is incredibly strong. It gets its name because it looks like a capital H over its cross section.

H-Beams. Rolled steel with an H-shaped cross-section. Equal thickness in the two parallel flanges with no taper on the inside surface.

Many states are retrofitting older highways with epoxy-coated dowel bars. The retrofit begins with cutting of six slots (three in each wheel path) across all transverse joints or cracks. The slots are cut with ganged diamond saws that make six cuts in each wheel path. The concrete between the saw cuts is then removed with lightweight jackhammers (heavy-weight jackhammers tend to damage the concrete around the cuts). The epoxy-coated dowel bars are placed in the slots, then the slots are filled with grout and the joints or cracks are filled with waterproof caulk. The final step is to diamond-grind the joint to remove both excess grout and any displacement of the panels.

The final step often involves diamond-grinding of the entire road surface to remove any bumps or dips. Without the dowel bar retrofit this grinding would have to be repeated every six to eight years, but it is predicted that the retrofit will greatly increase this interval. Dowel Bar Retrofit has been proven to outlast Asphalt Overlay by at least ten years, and significantly improves ride quality.

MS Angels are used for manufacturing of truck-trailers, EOT cranes and Gantry, escalators and elevators,ship building, factory sheds, bus body, communication and transmission towers, conveyors, boilers, agricultural equipment, and construction of bridges, scaffolding and many more fabrication and engineering industries.

steel angles, also known more commonly as Angle Iron, are typically L shaped lengths of metal with often equal-sized sides and sold in a variety of lengths.

An I-beam, also known as H-beam (for universal column, UC), w-beam (for "wide flange"), ... 1 History; 2 Overview; 3 Design ... ISMB: Indian Standard Medium Weight Beam, ISJB: Indian Standard Junior Beams, ISLB: Indian Standard Light

A ms channel is a roll formed metal strip that has been shaped into a tube or a U, J, or C shape for industrial and manufacturing use.

 Rolled steel with an H-shaped cross-section. Equal thickness in the two parallel flanges with no taper on the inside surface.

The sections are best suited for welding, are corrosion resistant, and easily bendable which leads to the shaping and construction of aesthetically appealing structures without compromising on strength and durability.

Mild Steel (MS) Round Bars. MS Round Bars are used by forging industries, bright bar industries, auto-ancillaries, foundation and anchor bolts, pins, rollers, bushes, and many more engineering industries.

A metal beam is a structural steel product that is made to support heavy loads. we provide best in this

Many states are retrofitting older highways with epoxy-coated dowel bars. The retrofit begins with cutting of six slots (three in each wheel path) across all transverse joints or cracks. The slots are cut with ganged diamond saws that make six cuts in each wheel path. The concrete between the saw cuts is then removed with lightweight jackhammers (heavy-weight jackhammers tend to damage the concrete around the cuts). The epoxy-coated dowel bars are placed in the slots, then the slots are filled with grout and the joints or cracks are filled with waterproof caulk. The final step is to diamond-grind the joint to remove both excess grout and any displacement of the panels.

The final step often involves diamond-grinding of the entire road surface to remove any bumps or dips. Without the dowel bar retrofit this grinding would have to be repeated every six to eight years, but it is predicted that the retrofit will greatly increase this interval. Dowel Bar Retrofit has been proven to outlast Asphalt Overlay by at least ten years, and significantly improves ride quality.

Many states are retrofitting older highways with epoxy-coated dowel bars. The retrofit begins with cutting of six slots (three in each wheel path) across all transverse joints or cracks. The slots are cut with ganged diamond saws that make six cuts in each wheel path. The concrete between the saw cuts is then removed with lightweight jackhammers (heavy-weight jackhammers tend to damage the concrete around the cuts). The epoxy-coated dowel bars are placed in the slots, then the slots are filled with grout and the joints or cracks are filled with waterproof caulk. The final step is to diamond-grind the joint to remove both excess grout and any displacement of the panels.

The final step often involves diamond-grinding of the entire road surface to remove any bumps or dips. Without the dowel bar retrofit this grinding would have to be repeated every six to eight years, but it is predicted that the retrofit will greatly increase this interval. Dowel Bar Retrofit has been proven to outlast Asphalt Overlay by at least ten years, and significantly improves ride quality.

We are involved in offering an immaculate range of Steel Beams to our clients. These are highly acclaimed for their optimal performance and great functionality. Our beams find usage in construction industry for architectural designs as well as for laying strong foundation of buildings. These products are offered in the ranges mentioned below:

 

• 100 X 50 M.M
• 125 X 65 M.M
• 150 X 75 M.M
• 175 X 85 M.M
• 200 X 100 M.M
• 250 X 125 M.M
• 300 X 140 M.M
• 350 X 140 M.M
• 400 X 140 M.M
• 450 X 150 M.M
• 500 X 180 M.M
• 600 X 210 M.M

ISMB Mild Steel Beams. 
size- 100x 50, 125x 70, 150x75, 200x100 , 250x 125 , 300x140 ,

The structural channel, also known as a C-channel or Parallel Flange Channel (PFC), is a type of (usually structural steel) beam, used primarily in building construction and civil engineering.

We provide our clients with MS Angle. The speciality of these angle is that these can easily withstand high temperature conditions and pressure state. Sturdy construction, smooth finishing and unmatched performance are the properties of these unequal Angle sections

We are engaged in offering this product to our clients. Our range of this products is widely appreciated by our clients

Sheet piles are sections of sheet materials with interlocking edges that are driven into the ground to provide earth retention and excavation support